FSP300-60PLN -5V, Aux ATX, 80mm fan

FSP300-60PLN -5V, Aux ATX, 80mm fan

Brand:FSP
Product Code: FSP300-60PLN -5V
Product available in stock : 15
  • £60.00

  • 2 or more £48.00

Available Options


rightbanner
2 year warranty
on all new Power Supply Units
  • Free UK shipping:
    On ALL products
  • Fast shipping:
    Usually within 1 day
  • Worldwide shipping:
    Order from anywhere
  • 24/7 support:
    Contact us by E-mail
  • 100% satisfaction:
    30-day return policy
  • 2-year warranty:
    On ALL PSUs

-High-quality branded 300 watt Power Supply Unit (PSU).

-With -5 volt rail (white wire) especially suitable for older systems and vintage computers with ISA bus.

-Optional 6pin flat Auxiliary ATX connector found on older motherboards.

-This PSU has an 80mm fan, making it ideal for slim chassis such as 2U 19inch industrial rackmounts, where a 120mm fan on top of the PSU would be obstructed by the lid.

-Optional switch removal. This is ideal for computers where the PSU cutout does not allow the installation of a PSU with an on/off switch. 


Specification
Model Number FSP300-60PLN
AC Input Full range 110 - 230Volt. Suitable worldwide. With manual voltage switch.
Power Output 300 Watt
PSU type Standard ATX PS2 PSU.
Form Factor ATX
Material Metal Casing
Colour Grey
Ventilation 1x 80mm fan (near power socket). Ideal for slim chassis such as 2U rackmounts where the limited room under the lid does not allow ventilation with a 120mm fan on top of the PSU.
Safety Standards Global approved: RU, TUV, CE, BSMI, CCC, FCC.
Product size & weight 8.5 x 14 x 15 cm / 3.35 x 5.51 x 5.9 inch / 1.4kg
Connectors
20/24-pin ATX 1x (20+4) pin connector suitable for Motherboards with 20 or 24 pin socket. (41cm long).
Molex 4x Molex connectors.
SATA 4x SATA connectors.
Floppy (Berg) 1x Floppy Drive Berg connector.
4-pin CPU 1x 12V 4pin P4 connector.
Auxiliary ATX Optional Auxiliary ATX 6pin flat connectors required on some older motherboards.
DC Output
+12V1 15A
+5V 30A
+3.3V 28A
+5Vsb 2A
-12V 0.8A
-5V 0.3A. This -5 Volt white wire is usually required on older types of motherboards for ISA bus. Now obsolete, This wire is not found on new PSUs. Check your requirements or old PSU.
More Info
Package size & weight 30 x 20 x 10 cm / 11.8 x 7.8 c 3.9 inch / 1.8kg
Product Condition Brand new
Warranty 1 year standard warranty + 1 year FREE extended warranty = 2 year warranty.
Return Return accepted within 30 days if unwanted.
Made in China
Shipped from United Kingdom
Remarks Contact us with your old PSU model number and picture if you require assistance in finding a suitable replacement. It is advisable to test your old PSU before purchasing a new one (see last picture).

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha